REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
REPAIR FOR COMPONENT PARTS
REPAIR FOR COMPONENT PARTS
Rear Internal Gear and Forward Clutch Hub
(Cont’d)
4. Remove end bearing.
SATS00A
5. Remove forward one-way clutch and end bearing as a unit from forward clutch hub.
SAT955A
6. Remove snap ring from forward clutch hub. |
SAT901A INSPECTION Rear internal gear and forward clutch hub @ Check gear for excessive wear, chips or cracks. @ Check frictional surfaces of forward one-way clutch and_ thrust washer for wear or damage. @ Check spline for wear or damage.
SAT902A Snap ring and end bearing @ Check for deformation or damage.
SAT903A
AT-158
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.